Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-10612, 54-10612 & 75-10612This Part Fits:
Year
Make
Model
Submodel
2004-2005
Chevrolet
Silverado 2500 HD
Bas...
Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-10192, 54-10192 & 75-10192This Part Fits:
Year
Make
Model
Submodel
2003
Ford
Excursion
Eddie Bauer
2000-20...
This trim seal’s PVC construction is flexible and durable, withstanding temperatures from -40°F to 212°F (-40°C to 100°C). It features a 3/4” EPDM bulb, allowing for a seal between the intake and v...
This plug is a popular replacement for aFes Duramax inlet tube. This plug allows you to remove the bulky resonator from the factory intake. Dont use PCV pipe or try to rig something when you can us...
This vent tube easily inserts into the vent fitting on the factory tube to assure the ideal amount of vacuum is pulled after the installation of an aFe POWER air intake system. Refer to the air int...
Durable Clear Polycarbonate Construction:With its durable injection molded polycarbonate construction, this filter sight window is resistant to cracking and impact. Its transparent finish allows fo...
The high temperature 2-PLY reinforced silicone 40 degree reducer coupler is designed to connect to a (4" x 3-1/2") OD tube and is 3" long. The coupling is 3" long with a 40 degree bend. Standard st...
The high temperature 2-PLY reinforced silicone hump coupler is designed to connect to a 3-1/2" ID tube and is 3" long. Standard stainless steel worm-gear #056 clamps provides tight connections, dur...
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obviou...
Dynamic Air Scoops lower air intake temperatures by forcing more cool air from the front grilles into the factory intake tract. These scoops are constructed from 100% twill weave carbon fiber (no f...
This 8-1/2” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine wi...
Takeda Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Hyundai Palisade. It is designed to capture the coolest...
Takeda Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Hyundai Elantra GT or i30. It is designed to capture th...
aFe POWER is now offering a Magnum FORCE Torque Booster Tube for the 2003-2007 Ford Diesel Trucks with V8-6.0L (td) engine. This torque booster tube is the perfect replacement for the aging, brittl...
The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum GT air intake system from the front of the vehicle. This scoop is cons...
The Dynamic Air Scoop (D.A.S.) from aFe is a very simple bolt-on product that increases airflow and velocity into the Momentum GT air intake system through front grille area. This scoop is construc...
aFe POWER Dynamic Air Scoop (D.A.S.) is a simple bolt-on product meant to decrease the intake air temperature while increasing the airflow velocity. This scoop is constructed of high quality cross-...
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obviou...
The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum HD air intake system from the front of the vehicle. This scoop is cons...
Lower Intake Air Temperatures: This Dynamic Air Scoop takes advantage of the Challenger™s factory Air Catcher headlight inlet by guiding cool ambient air from outside the vehicle directly into you...
Lower Intake Air Temperatures: This Dynamic Air Scoop takes advantage of the Challenger™s factory Air Catcher headlight inlet by guiding cool ambient air from outside the vehicle directly into you...
A simple install will allow you to make our aFe intakes compatible with your V6-2.7L (tt) Ecoboost. This intake air temperature harness extension is made from high quality looming & wires, with...
Magnum Force Cold Air Intake System Dynamic Air Scoop (D.A.S.) increases cool, fresh airflow for maximum performance and throttle response for your Ford Ranger. It is designed to capture the cooles...
Showing 769 -792 of 812 items
Add to cartSold out
Choosing a selection results in a full page refresh.
This company lies to you. Ordered a 02 sensor from APPD for my C7 Vette. Paid the highest possible courier service for the fastest possible shipping from Newcastle to France. I needed the part urgently. Ordered at the weekend and called them Monday to confirm all was in hand and explained the part was required urgently. Response from APPD yes we've recieved the order and will ship as soon as its been processed. Called every day for the next 7 days to be told yes its been shipped and this is the shipping number. Turned out it took them till Friday ..5 days later to post it and then the package lay at the courier another week or so. APPD lied to me throughout this whole transaction. The package cleared customs in 2 days and should have been with me in just over week and not over 4 weeks. APPD offereed the postage refunded after I had to start a PAYPAL dispute.. This should have been a straight forward simple part delivery.When it goes wrong you shouldn't lie to your customer. A serious compay would refund the customer not try to fuzz the truth and blame everyone else. I refused the postage delivery refund so you can buy some honesty pills and discuss with your team how to avoid more negative service feedback. If your thinking of ordering parts from APPD scroll on and find another supplier. You dont need or want the hassle of dealing with these people.
wade Patout
Over a month waiting on parts and all I get is it will scan soon week after week. Reordered from US so I could finish build and same parts arrived in one week. Waiting to see if they will refund??
Gareth weare
placed an order for parts 13th of feb, all listed in stock, got shipping update for label created on the 16th of feb. I have still not received what I ordered and paid for, no updates. I have been getting the same generic answer "order will be fulfilled today" for nearly 2 months now when trying to enquire. Quite disappointing as I have been unable to finish off my car due to waiting on the final fuel system parts for over 2 months now.
PHILIP HYDE
I initially ordered the wrong part but managed to change the order before it was sent out. Lovely product Really well made.
Chris Impey
Made my first purchase with these guys, very helpful and quick replies to my questions.
Delivery was very quick, will be using again
AAAAAA++++++++
Julian Boulter
Brilliant communication, bought parts very difficult to source in the UK, this was the only supplier who managed to get them for me...top service!!!