System will fit Bullitt models. NOT recommended for use on convertibles. This 3" diameter high flow Cat-Back(tm) system was designed specifically for the Mustang GT and has Active Exhaust Valves. T...
NICHT für die Verwendung bei Cabrios empfohlen. System mit 3 Zoll Durchmesser. Das System enthält ein X-Rohr für mehr Leistung und besseren Klang. Das System verfügt über aktive Auslassventile. Die...
System will fit Bullitt models. NOT recommended for use on convertibles. This 3" diameter high flow Cat-Back(tm) system was designed specifically for the Mustang GT and has Active Exhaust Valves. T...
This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" Outside Diameter (O.D.) round carbon fiber tips with bright center outl...
Use this muffler/ resonator to change the sound of your Borla(r) Cat-Back(tm) 140755 from an S-Type sound level to an ATAK(r) sound level. Use ONLY with Borla(r) system. It does NOT fit competitor ...
Und das Beste: BORLA(r) steht für jedes System mit einer Millionen-Meilen-Garantie. Genau das, was Sie von der erfahrensten (und erfolgreichsten) Auspuffmarke der Welt erwarten. Dieses Teil passt f...
Mit polierten T-304 Edelstahlspitzen. Die BORLA(r) Cat-Back(tm) & Axle-Back Multi-Core-Technologie wurde entwickelt, um verborgene PS freizusetzen. Eine erhöhte Auspuffgeschwindigkeit sorgt für...
Jedes System ist aus hochwertigem austenitischem Edelstahl T-304 gefertigt, der den Nachahmerprodukten der T-400-Serie (wie 409) überlegen ist, um Ihnen die absolut beste Leistung und Haltbarkeit z...
Das System verfügt über polierte Endstücke aus T-304-Edelstahl. BORLA(r) Cat-Back(tm)- und Axle-back-Auspuffanlagen verfügen über patentierte Straight-Through- und Multi-Core-Technologie, die darau...
Verfügt über eine langlebige, hochtemperaturbeständige, satinschwarze Keramikoberfläche auf der gesamten Axle-Back-Baugruppe. BORLA(r) Cat-Back(tm)- und Axle-Back-Auspuffanlagen verfügen über eine ...
Das System verfügt über polierte Endstücke aus T-304-Edelstahl. BORLA(r) Cat-Back(tm)- und Axle-Back-Auspuffanlagen verfügen über patentierte Straight-Through- und Multi-Core-Technologie, die darau...
These carbon fiber tips with bright centers are designed to be used with Borla(r) Cat-Back(tm) system 140736. Kit includes four tip assemblies. Easy bolt on installation. Will NOT fit the Original ...
Dieses System verwendet die Werksspitzen wieder und enthält KEINE Spitzen. Optionale Borla-Spitzen können separat erworben werden. Beachten Sie die verwandten Produkte unten. Das System enthält X-P...
Does NOT fit the Navigator L with the 131.6" Wheelbase. This 2.5" diameter Cat-Back™ system features single 4" round black chrome on T-304 stainless steel tips on each tail pipe. It delivers the m...
Does NOT fit MK7. This 3" diameter into dual 2.25" Cat-Back™ system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction...
Does NOT fit MK7. This 3" diameter into dual 2.25" Cat-Back™ system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction...
Does NOT fit MK7. This3" diameter Cat-Back(tm) system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction is desired. A...
This system features the aggressive ATAK(r) sound and a merge X-Pipe for increased flow and improved performance. This system re-uses the factory tips and does NOT include tips. Optional Borla(r) t...
System contains a X-Pipe for increased performance and improved flow. This system re-uses the factory tips and does NOT include tips. Optional Borla(r) tips can be purchased separately. Note the Re...
ECE approved systems are those that comply with Economic Commission for Europe (according to ECE-R59) rules for motor vehicles, vehicle systems and components. This system will fit Bullitt models. ...
ECE approved systems are those that comply with Economic Commission for Europe (according to ECE-R59) rules for motor vehicles, vehicle systems and components. This system will fit Bullitt models. ...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit vehicles ONLY. Tips NOT included, reuse factory tips. This 2.5" diameter inlet into 2.75" pipes Cat-Back(tm) system by Borla(r) features a "Tru...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit ONLY. This Cat-Back(tm) system by Borla(r) features a True Dual design which REQUIRES cutting the factory Y-Pipe. The 2.5" inlet into 2.75 pi...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit vehicles ONLY. This 2.5" diameter inlet into 2.75" pipes Cat-Back(tm) system by Borla(r) features a True Dual design which REQUIRES cutting the...
Anzeigen 577 -600 von 1210 Artikel
In den Warenkorb legenAusverkauft
Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.
This company lies to you. Ordered a 02 sensor from APPD for my C7 Vette. Paid the highest possible courier service for the fastest possible shipping from Newcastle to France. I needed the part urgently. Ordered at the weekend and called them Monday to confirm all was in hand and explained the part was required urgently. Response from APPD yes we've recieved the order and will ship as soon as its been processed. Called every day for the next 7 days to be told yes its been shipped and this is the shipping number. Turned out it took them till Friday ..5 days later to post it and then the package lay at the courier another week or so. APPD lied to me throughout this whole transaction. The package cleared customs in 2 days and should have been with me in just over week and not over 4 weeks. APPD offereed the postage refunded after I had to start a PAYPAL dispute.. This should have been a straight forward simple part delivery.When it goes wrong you shouldn't lie to your customer. A serious compay would refund the customer not try to fuzz the truth and blame everyone else. I refused the postage delivery refund so you can buy some honesty pills and discuss with your team how to avoid more negative service feedback. If your thinking of ordering parts from APPD scroll on and find another supplier. You dont need or want the hassle of dealing with these people.
wade Patout
Over a month waiting on parts and all I get is it will scan soon week after week. Reordered from US so I could finish build and same parts arrived in one week. Waiting to see if they will refund??
Gareth weare
placed an order for parts 13th of feb, all listed in stock, got shipping update for label created on the 16th of feb. I have still not received what I ordered and paid for, no updates. I have been getting the same generic answer "order will be fulfilled today" for nearly 2 months now when trying to enquire. Quite disappointing as I have been unable to finish off my car due to waiting on the final fuel system parts for over 2 months now.
PHILIP HYDE
I initially ordered the wrong part but managed to change the order before it was sent out. Lovely product Really well made.
Chris Impey
Made my first purchase with these guys, very helpful and quick replies to my questions.
Delivery was very quick, will be using again
AAAAAA++++++++
Julian Boulter
Brilliant communication, bought parts very difficult to source in the UK, this was the only supplier who managed to get them for me...top service!!!