System will fit Bullitt models. NOT recommended for use on convertibles. This 3" diameter high flow Cat-Back(tm) system was designed specifically for the Mustang GT and has Active Exhaust Valves. T...
NOT recommended for use on Convertibles. 3" diameter system. System contains a merge X-Pipe for increased performance and improved sound. System has Active valve Exhaust valves. This system feature...
System will fit Bullitt models. NOT recommended for use on convertibles. This 3" diameter high flow Cat-Back(tm) system was designed specifically for the Mustang GT and has Active Exhaust Valves. T...
This tip kit contains 2) tip assemblies with a total of 4) outlets. These single 3" Inside Diameter (I.D.) Inlet with dual 4" Outside Diameter (O.D.) round carbon fiber tips with bright center outl...
Use this muffler/ resonator to change the sound of your Borla(r) Cat-Back(tm) 140755 from an S-Type sound level to an ATAK(r) sound level. Use ONLY with Borla(r) system. It does NOT fit competitor ...
This 2.5" diameter Axle-Back system features the aggressive ATAK(r) sound level and a durable high-temperature ceramic satin black finish on the entire Axle-back assembly including the single 3.5" ...
This 2.5" diameter Axle-Back system features the aggressive ATAK(r) sound level and single 3.5" round polished T-304 stainless steel tips on each tail pipe. A system with a black coated muffler ass...
This 2.5" diameter Axle-Back system features the classic S-Type sound level and a durable high-temperature ceramic satin black finish on the entire Axle-back assembly including the 3.5" T-304 stain...
This 2.5" diameter Axle-Back system features the classic S-Type sound level and single 3.5" round polished T-304 stainless steel tips on each tail pipe. A system with a black coated muffler assembl...
This 2.5" diameter Axle-Back system features the mellow Touring sound level and a durable high-temperature ceramic satin black finish on the entire Axle-back assembly including the single 3.5" roun...
This 2.5" diameter Axle-Back system features the mellow Touring sound level and single 3.5" round polished T-304 stainless steel tips on each tail pipe. A system with black finish on the entire Axl...
These carbon fiber tips with bright centers are designed to be used with Borla(r) Cat-Back(tm) system 140736. Kit includes four tip assemblies. Easy bolt on installation. Will NOT fit the Original ...
This Cat-Back™ system re-uses the factory tips and does NOT include tips. Optional BORLA® tips can be purchased separately. The system was designed specifically for the 3.3L Stinger GT with a True ...
Does NOT fit the Navigator L with the 131.6" Wheelbase. This 2.5" diameter Cat-Back™ system features single 4" round black chrome on T-304 stainless steel tips on each tail pipe. It delivers the m...
Does NOT fit MK7. This 3" diameter into dual 2.25" Cat-Back™ system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction...
Does NOT fit MK7. This 3" diameter into dual 2.25" Cat-Back™ system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction...
Does NOT fit MK7. This3" diameter Cat-Back(tm) system delivers the classic S-Type sound with no drone inside the vehicle. Add optional resonator 60666 when additional sound reduction is desired. A...
This system features the aggressive ATAK(r) sound and a merge X-Pipe for increased flow and improved performance. This system re-uses the factory tips and does NOT include tips. Optional Borla(r) t...
System contains a X-Pipe for increased performance and improved flow. This system re-uses the factory tips and does NOT include tips. Optional Borla(r) tips can be purchased separately. Note the Re...
ECE approved systems are those that comply with Economic Commission for Europe (according to ECE-R59) rules for motor vehicles, vehicle systems and components. This system will fit Bullitt models. ...
ECE approved systems are those that comply with Economic Commission for Europe (according to ECE-R59) rules for motor vehicles, vehicle systems and components. This system will fit Bullitt models. ...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit vehicles ONLY. Tips NOT included, reuse factory tips. This 2.5" diameter inlet into 2.75" pipes Cat-Back(tm) system by Borla(r) features a "Tru...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit ONLY. This Cat-Back(tm) system by Borla(r) features a True Dual design which REQUIRES cutting the factory Y-Pipe. The 2.5" inlet into 2.75 pi...
EXCEPT ZR2 & AT4X models. Factory Split Rear Exit vehicles ONLY. This 2.5" diameter inlet into 2.75" pipes Cat-Back(tm) system by Borla(r) features a True Dual design which REQUIRES cutting the...
Showing 577 -600 of 1210 items
Add to cartSold out
Choosing a selection results in a full page refresh.
This company lies to you. Ordered a 02 sensor from APPD for my C7 Vette. Paid the highest possible courier service for the fastest possible shipping from Newcastle to France. I needed the part urgently. Ordered at the weekend and called them Monday to confirm all was in hand and explained the part was required urgently. Response from APPD yes we've recieved the order and will ship as soon as its been processed. Called every day for the next 7 days to be told yes its been shipped and this is the shipping number. Turned out it took them till Friday ..5 days later to post it and then the package lay at the courier another week or so. APPD lied to me throughout this whole transaction. The package cleared customs in 2 days and should have been with me in just over week and not over 4 weeks. APPD offereed the postage refunded after I had to start a PAYPAL dispute.. This should have been a straight forward simple part delivery.When it goes wrong you shouldn't lie to your customer. A serious compay would refund the customer not try to fuzz the truth and blame everyone else. I refused the postage delivery refund so you can buy some honesty pills and discuss with your team how to avoid more negative service feedback. If your thinking of ordering parts from APPD scroll on and find another supplier. You dont need or want the hassle of dealing with these people.
wade Patout
Over a month waiting on parts and all I get is it will scan soon week after week. Reordered from US so I could finish build and same parts arrived in one week. Waiting to see if they will refund??
Gareth weare
placed an order for parts 13th of feb, all listed in stock, got shipping update for label created on the 16th of feb. I have still not received what I ordered and paid for, no updates. I have been getting the same generic answer "order will be fulfilled today" for nearly 2 months now when trying to enquire. Quite disappointing as I have been unable to finish off my car due to waiting on the final fuel system parts for over 2 months now.
PHILIP HYDE
I initially ordered the wrong part but managed to change the order before it was sent out. Lovely product Really well made.
Chris Impey
Made my first purchase with these guys, very helpful and quick replies to my questions.
Delivery was very quick, will be using again
AAAAAA++++++++
Julian Boulter
Brilliant communication, bought parts very difficult to source in the UK, this was the only supplier who managed to get them for me...top service!!!