4in. lift spindles made from ductile iron and e-coated. Comes with DOT approved brake lines and all necessary hardware. Recommended wheel size is 17in. or larger with 4 3/4 back spacing. Recommende...
Comes with qty (2) torsion keys that are made from forged steel and powder coated grey to prevent rust.This Part Fits:
Year
Make
Model
Submodel
2004
Chevrolet
Colorado
Base
2004,2006-2008
Chev...
The Maxtrac Suspension 2.5-inch lift for the GM Colorado/Canyon is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by replacing the factory torsion k...
Flip kit includes spring hangers; Axle relocators; Spring plates; U-bolt retainer plates; U-bolts; and all necessary hardware to complete installation.Installation InstructionsThis Part Fits:
Year...
Twin Tube Gas Shock; Loop/Loop; 26.50 in. Extended; 16.00 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;This Part Fits:
Year
Make
Model
Sub...
Our 2 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with 2-inch lowering coil springs for the front. The rear comes with 2" low...
Our 2/4 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with a 2-inch lowering coil springs for the front. The rear comes with a ...
Twin Tube Gas Shock; Loop/Loop; 26.50 in. Extended; 16.00 in. Collapsed; Incl. Hardware; 3 in. Bar Pin; 9/16 in. Sleeve; Must Be Installed w/Shock Shaft Towards The Top;This Part Fits:
Year
Make
M...
MAX TRAC SUSPENSION'S PART# 833130 IS A PAIR OF 2.5"-3" LIFT STRUT SPACERS FABRICATED FROM STEEL & POWDER COATED GREYInstallation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2007-20...
2in. rear lowering shackles come complete with greasable bushings and sleeves along with zerk fittings. Powdercoated grey to eliminate rust.This Part Fits:
Year
Make
Model
Submodel
2007-2008,201...
Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.This Part Fits:
Year
Make
Model
Submodel
2011-2014
F...
Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.This Part Fits:
Year
Make
Model
Submodel
2007-2008,2...
MAX TRAC SUSPENSION'S PART# 713120 IS A PAIR OF 1" REAR LIFT SHACKLES FABRICATED FROM STEEL & POWDER COATED GREYThis Part Fits:
Year
Make
Model
Submodel
2007-2008,2010-2014
Ford
F-150
FX2
...
MAX TRAC SUSPENSION'S PART# MP883122 IS A 2.5"/1" LEVELING KIT INCLUDING FRONT STRUT SPACERS & REAR SHACKLESThis Part Fits:
Year
Make
Model
Submodel
2007-2008,2010-2014
Ford
F-150
FX2
2004...
Twin Tube Gas Shock; Loop/Loop; 22.30 in. Extended; 13.40 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;This Part Fits:
Year
Make
Model
Sub...
Twin Tube Gas Shock; Loop/Loop; 24.50 in. Extended; 14.60 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;This Part Fits:
Year
Make
Model
Sub...
Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.This Part Fits:
Year
Make
Model
Submodel
2005-2009
N...
2in. rear lowering shackles come complete with greasable bushings and sleeves along with zerk fittings. Powdercoated grey to eliminate rust.This Part Fits:
Year
Make
Model
Submodel
2004-2010
Nis...
MAX TRAC SUSPENSION'S PART# 833125 IS A PAIR OF 2"-2.5" LIFT STRUT SPACERS FABRICATED FROM STEEL & POWDER COATED GREYThis Part Fits:
Year
Make
Model
Submodel
2007-2008,2010-2014
Ford
F-150
F...
MAX TRAC SUSPENSION'S PART# 833120 IS A PAIR OF 1.5"-2" LIFT STRUT SPACERS FABRICATED FROM STEEL & POWDER COATED GREYInstallation InstructionsThis Part Fits:
Year
Make
Model
Submodel
2007-20...
MAX TRAC SUSPENSION'S PART# 905320 IS A 2" REAR BOX KIT INCLUDING 2" LIFT BLOCKS, U-BOLTS & A PAIR OF MAX TRAC REAR SHOCKSThis Part Fits:
Year
Make
Model
Submodel
2004-2010
Nissan
TITAN
LE
...
MAX TRAC SUSPENSION'S PART# 905320F IS A REAR BOX KIT INCLUDING 2" LIFT BLOCKS, U-BOLTS & A PAIR OF FOX 2.0 PERFORMANCE SERIES REAR SHOCKSThis Part Fits:
Year
Make
Model
Submodel
2004-2010
N...
4in. lift spindles made from ductile iron and e-coated. Comes with DOT approved brake lines and all necessary hardware. Recommended wheel size is 17in. or larger with 5in. back spacing. Recommended...
MAX TRAC SUSPENSION'S PART# 905340 IS A 4" REAR BOX KIT INCLUDING 2.5" LIFT STRUT SPACERS, 4" LIFT BLOCKS, U-BOLTS, CARRIER BEARING DROP & A PAIR OF MAX TRAC REAR SHOCKSThis Part Fits:
Year
Ma...
Showing 73 -96 of 644 items
Important Notice – Temporary Delay
We will be temporarily closed from Monday 10th August until Friday 21st August 2026 while we relocate to our new premises and carry out our annual stock take. Our website will remain open and you are welcome to place orders during this period. However, new orders placed between 11th and 21st August will not be processed or dispatched until we reopen. Please note: Any orders currently open and already in our system will continue to be processed as normal and will not be affected by the temporary closure. If you have an urgent order or require something that cannot wait until we reopen, please contact us via our website chat or email. We will do our best to assist wherever possible. Normal service will resume on Saturday 22nd August 2026. We apologise for any inconvenience this may cause and greatly appreciate your patience and continued support while we complete our relocation and annual stock take. Thank you for your understanding and continued support.
Add to cartSold out
Choosing a selection results in a full page refresh.